Publicité
Les langues disponibles
Les langues disponibles
Audio Adjustments
Each press of 5 or ∞ increases or decreases
the treble level.
–
+6
–6
is increased or decreased.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press
to open the front panel.
OPEN
2 Press
to select
AUDIO
Press
until
AUDIO
Loud
3 Press 5 to turn loudness on.
Loudness level (e.g.,
Loud Mid
display.
4 Press 2 or 3 to select the level.
Press 2 or 3 until the desired level appears in
the display.
(low)—
(mid)—
Low
Mid
5 Press ∞ to turn loudness off.
appears in the display.
Loud OFF
Using subwoofer output
This unit is equipped with a subwoofer output
which can be switched on or off.
1 Press
to open the front panel.
OPEN
2 Press
to select
AUDIO
When the subwoofer controller setting is
, you can select
Control:EXT
until
appears in the display.
AUDIO
Sub-W1
is displayed as the level
.
Loud
appears in the display.
) appears in the
(high)
High
.
Sub-W1
S.W
. Press
Sub-W1
3 Press 5 to turn subwoofer output on.
appears in the display.
Sub-W1 Normal
Subwoofer output is now on.
• You can turn off subwoofer output by pressing
∞.
4 Press 2 or 3 to select the phase of sub-
woofer output.
Press 2 to select reverse phase and
appears in the display. Press 3 to select normal
phase and
appears in the display.
Normal
Adjusting subwoofer settings
When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.
1 Press
to open the front panel.
OPEN
2 Press
to select
AUDIO
When the subwoofer output is on, you can
select
. Press
Sub-W2
AUDIO
(Hz) appears in the display.
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as
(Hz).
3 Press 2 or 3 to select cut-off frequency.
Press 2 or 3 until the desired cut-off frequency
appears in the display.
—
—
(Hz)
50
80
125
• Only frequencies lower than those in the
selected range are output from the subwoofer.
4 Press 5 or ∞ to adjust the output level of
the subwoofer.
Each press of 5 or ∞ increases or decreases
the level of the subwoofer.
as the level is increased or decreased.
Press 5 or ∞ until you see the desired value
displayed.
Section
Rev.
.
Sub-W2
until
Sub-W2 80
(Hz) or
50
125
–
is displayed
+6
–6
En
07
41
Publicité
