Télécharger Imprimer la page

Pioneer Premier DEH-P840MP Mode D'emploi page 29

Publicité

Les langues disponibles

Les langues disponibles

Multi-CD Player
Playing a CD
1
You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 30.
1
indicator
DISC NUMBER
Shows the disc currently playing.
2
indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
3
indicator
TRACK NUMBER
Shows the track currently playing.
1 Press
to select the multi-CD
SOURCE
player.
Press
until you see
SOURCE
2 Use
to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the
to
buttons.
1
6
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as
for disc 7, until the disc number
1
appears in the display.
• You can also sequentially select a disc by
pressing 5/∞.
2
3
displayed.
Multi-CD
4 To perform fast forward or reverse, press
and hold 2 or 3 .
5 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• When the multi-CD player performs the
preparatory operations,
• If the multi-CD player does not operate prop-
erly, an error message such as
be displayed. Refer to the multi-CD player
owner's manual.
• If there are no discs in the multi-CD player
magazine,
is displayed.
NO DISC
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
is displayed.
Ready
may
ERROR-11
En
Section
06
29

Publicité

loading