Toshiba fstPure 14AF46C Manuel D'utilisation page 23

Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display the word MUTE in the lower right-hand corner.
To restore the sound, press MUTE again.
Selecting stereo/SAP broadcasts
You can listen to high-fidelity stereo sound with the Multi-channel TV
Sound (MTS) feature. MTS can also transmit a second audio program
(SAP) containing a second language or other audio information.
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available in the VIDEO mode.
You can leave your TV in STEREO mode because it will automatically
output stereo or monaural sound, depending on the broadcast type. If
the stereo sound is noisy, select MONO to reduce the noise. The word
STEREO or SAP is displayed in light blue when the TV receives the
signal.
To select the desired MTS setting:
Repeatedly press the MTS button to select either STEREO, SAP,
MONO+SAP, or MONO. If the current program is not available in stereo
or SAP, the setting will not be available when you press the MTS
button.
Adjusting the sound quality
You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, then press a or b until the AUDIO menu appears.
CH
PICTURE AUDIO SETUP OPTION
BASS
TREBLE
BALANCE
SURROUND OFF
STABLE SOUND OFF
SELECT ADJUST
2. Press c or d to highlight the item you want to adjust.
3. Press a or b to adjust the level.
CH
PICTURE AUDIO SETUP OPTION
BASS
TREBLE
BALANCE
SURROUND OFF
STABLE SOUND OFF
SELECT ADJUST
• a makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
• b makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
J3S00721A(E)_P23-BACK 23
All manuals and user guides at all-guides.com
32
32
0
32
32
0
23
Recall
Mute
MTS
STEREO
MONO
If the current program is not broadcasting
either stereo or SAP, those settings will not
be available when you press the MTS button.
c d a b
Menu
Reset
Note:
To reset the audio adjustments to the factory
settings, press RESET.
26/12/05, 2:20 PM
SAP
MONO + SAP