Publicité
Les langues disponibles
Les langues disponibles
Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase specific channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press
or
until the TV/CABLE
c
d
selection is highlighted.
3. Press
or
to highlight either TV
a
b
or CABLE, depending on which
you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press
to select CH PROGRAM.
d
5. Press
or
to start channel programming. The TV will automati-
a
b
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH + or – to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press
display the SETUP menu.
3. Press
or
to highlight ADD/
c
d
ERASE.
4. Press
or
to select ADD or
a
b
ERASE, whichever function you
want to perform.
5. Repeat steps 1–4 for other
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
L
Press Channel
or
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
J3S00721A(E)_P07-13
13
All manuals and user guides at all-guides.com
or
to display the SETUP menu.
a
b
CH
PICTURE AUDIO
SETUP
TV / CABLE
TV CABLE
CH PROGRAM
START
ADD / ERASE
ADD
SELECT
or
to
a
b
CH
PICTURE AUDIO
SETUP
TV / CABLE
CABLE
CH PROGRAM
START
ADD / ERASE
ADD ERASE
SELECT
M
on the TV or CH + or – on the remote
OPTION
ADJUST
OPTION
ADJUST
13
26/12/05, 2:16 PM
Channel
Numbers
Channel +/–
c d a b
Menu
Publicité
