Hansgrohe Uno 13430 Serie Instructions De Montage page 6

Assembly
1. Flush through the supply pipes.
2. Mark the connections on the bath rim (centre
distance 150 mm) and drill.
3. Mount the pillar unions with the flanges and the
o-rings onto the rim and fix them with the
washers and the nuts.
4. Fit on the back-plate to the pillar unions.
5. Fasten the mixer using ball nuts.
6. Fit on the spout body and tighten the allen
screw.
7. Add the escutcheon and tighten using the nut.
8. Fit on flange.
9. Mount the lever head, tighten the allen screw
and fit on screw cover.
Large differences in pressure between the hot and
cold water supply should be balanced.
If so wished, the bath spout can be installed in such
a way that the bath/shower selecter knob is on the
left and the hose connecting piece is on the right. To
do this, proceed as follows:
Remove the complete diverter casing. Unscrew allen
screw at the back of the divertercasing. Remove
spout and cover and mount them on the reveres
side. Mount the spout on the mixer body.
The hose connecting piece turns 360°.
Operation
The mixer is actuated by pulling the lever head.
Swivel to the left = hot water, swivel to the right =
cold water.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temperature: 65° C
Centre distance:
Connections G ½":
Rate of flow by 3 bar:
6
English
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 1.5 bars.
To adjust the hot water limiter on single lever mixers,
please see page 11.
No adjustment is necessary when using a
continuous flow water heater.
Spare parts
1
1.1 screw cover
2
3
4
5
6
7
8
9
10 diverter knob cpl.
11 mousseur cpl.
12 spout cpl.
13 pillar union
14 noise reduction
XXX = Colors
030 chrome/blue
060 chrome/black
070 chrome/green
330 blue
430 red
450 white
480 yellow
580 yellow/satin chrome
max. 10 bars
610 black
1 - 5 bars
16 bars
max. 80° C
150 mm
cold right
hot left
approx. 22 l/min
handle
flange
escutcheon
nut
cartridge cpl.
service set
seals
mixer ball
selector cpl.
13690XXX
94063XXX
94261XXX
13983XXX
94106000
14096000
13952000
13962000
13964000
94155000
13471XXX
13485000
93450XXX
92470XXX
94073000
6