Playing Back With High Quality Sound Codec (Aac/Ldac™) - Sony GTK-XB7 Mode D'emploi

Playing back with high
quality sound codec
(AAC/LDAC™)
This system can receive data in the
AAC or LDAC codec format from a
BLUETOOTH device. It provides a
playback with higher sound quality.
You can select an audio codec option
from the following two settings by
using "SongPal" (page 20). The
default setting of this system is
"AUTO."
To apply the changes of the setting,
you need to terminate the BLUETOOTH
connection (page 17), and then
perform the BLUETOOTH connection
again.
• AUTO: The system detects the codec
used on the source device and
automatically selects the optimal
codec from "SBC," "AAC*" or "LDAC*."
• SBC: "SBC" is always applied
regardless of the codec used on the
source device.
* Available only when the codec is
supported by your BLUETOOTH device.
Note
You can enjoy higher sound quality
when the source device is compatible
with AAC/LDAC and this function is set
to "AUTO." However, the sound may be
interrupted depending on the conditions
of the BLUETOOTH communication. If this
happens, set the function to "SBC."
18
GB
LDAC is an audio coding
technology developed by Sony,
that enables the transmission
of High-Resolution (Hi-Res)
Audio content, even over a
BLUETOOTH connection. Unlike
other BLUETOOTH compatible
coding technologies, such as
SBC, it operates without any
down-conversion of the Hi-Res
Audio content . It also allows
1)
approximately three times more
data than the other technologies,
2)
for transmitting over a
BLUETOOTH wireless network with
unprecedented sound quality using
efficient coding and optimized data
bundling.
Excluding DSD format contents.
1)
In comparison with SBC (Sub Band
2)
Codec), when the bit rate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz)
is selected.