Care; Fault Indications; Detaching Cover - Birchmeier Foam Cleaner 20 Mode D'emploi

Warning:
Water temperature max. 50°C
Volume max. 20 l
 Close pressure vessel
Close air supply valve (position across direction of flow).
Turn control valve anti-clockwise.
Insert power plug.
Set ON/OFF switch to „I".
Actuate hand gun until fluid in pressure vessel has been used up.

CARE

 Stopping machine
 Dissipate pressure
 Drain pressure vessel
 Flushing pressure vessel
Only use a damp cloth for cleaning the cleaner. Wipe over with clean, dry
cloth.
Do not use chemical cleaning agents!
Rinse out pressure vessel with water and leave standing open to dry.
Danger of poisoning!
 Never blow into clogged nozzles or valves.
 Take utmost care to avoid water pollution.
Clean fan jet nozzle by hand/with tooth brush.
29

FAULT INDICATIONS

Detaching cover

 Stopping machine
 Dissipate pressure
 Slacken off both wing nuts of vessel bracket
 Pull off air hose
Lift cover over base frame on either side.
Carefully lift cover off base frame and lay aside.
To fit, start by inserting one side beneath frame.
Pressing briefly from above engages cover on other side.