Each Time After Usage; Dissipating Pressure - Birchmeier Foam Cleaner 20 Mode D'emploi

Close air supply valve (position across direction of flow).
Set ON/OFF switch to „I".
Allow operating pressure to build up (compressor cuts out).
Actuate hand gun.
Note:
Use control valve to set delivery rate:
Turning anti-clockwise = Higher delivery rate
Turning clockwise = Lower delivery rate
Tip:
Pay careful attention to instructions of disinfectant manufacturer.

EACH TIME AFTER USAGE

Set ON/OFF switch „0".
25

Dissipating pressure

Open air supply valve.
Open pressure regulator and dissipate pressure.
Pull power plug.