Télécharger Imprimer la page

Pfannenberg DTS 6201C Instructions D'utilisation page 71

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 80
GB
5.2
Cleaning the cooling unit - Unit cover removal
Item
Designation
1
Fastening screws
4
Bottom plate slot
Requirement
-
The cooling unit is de-energized.
-
Wait for discharging phase of 5 minutes for the electrical components. Only then open the device.
Procedure
▪ Remove the fastening screws (1).
▪ Tilt the unit cover (5) forward 20° (2).
▪ Disconnect the earthing cable and connecting cables from the display or operating unit (inside) (3).
▪ Raise the unit cover about 15 mm and pull it out of the slots in the bottom plate (4).
The unit cover is removed.
Operating Manual DTS and DTI 6201C / 6301C Standard Controller (SC) 086100015c © Pfannenberg GmbH
1
5
Figure 23 – Unit cover removal
Item
Designation
2
Tilting angle 20°
5
Unit cover
1
2
3
4
Item
3
Designation
Display or operating unit
Page 32 / 39

Publicité

loading

Ce manuel est également adapté pour:

Dti 6301cDti 6201cDts 6301cDts serieDti serie