Pfannenberg DTS 6201C Instructions D'utilisation page 59

GB
3.5 Electrical connection
3.5.1 Standard controller (SC) electrical circuit diagram
DANGER
Life-threatening danger due to electric shock
Live units and exposed connection cables can generate an electric shock and cause severe accidents.
➢ Work on electrical connections must be carried out exclusively by trained, qualified electricians.
➢ Ensure that the unit is voltage-free before routing all electrical connections.
S1.1
S1.2
DIP-switch
Power cable
2x 400V - 460V 50 Hz
2x 400V - 460V 60 Hz
Item Designation
C1 Starting capacitor
LP1 Controller
M2 Condenser fan
S1.1 Door open
TK Door contact/ signal (4,5)
Temperature sensor
TS2
(external)
X50 Mains terminal contact
Operating Manual DTS and DTI 6201C / 6301C Standard Controller (SC) 086100015c © Pfannenberg GmbH
Fault
Item
F1
H1
(external) M3
S1.2
T1
X28
X54
Designation
High-pressure pressostat
LED / indicator unit
Evaporator fan (internal)
Door close
Transformer
Service interface (TTL)
Door contact+ terminal
contact +Fault indication
085 000 484 11189-865
Item Designation
F4-F5 Fuse
M1 Compressor
S1 Door contact
SK Fault signal contact (1,2)
Temperature sensor
TS1
(internal)
X40 Ground terminal contact
Optional
Page 20 / 39