Basic use of racks
Height adjustment
You can adjust the height of the upper rack so that the lower rack can accommodate larger
sized dishes. Depending on the height of the upper rack, the lower rack can accommodate
plates up to 30 cm in diameter, and the upper rack can accommodate plates up to 18 cm
(with Cutlery rack) or 25 cm (without Cutlery rack) in diameter.
CAUTION
• Adjust the height of the upper rack before loading dishes into the rack. Adjusting the
rack after loading the dishes may damage the dishes.
• Make sure to hold both handles when adjusting, or the dishwasher door may not close
properly.
Upper rack removal
CAUTION
• Do not operate the dishwasher without the upper rack. Otherwise, noises occur and the
dishwasher does not operate properly.
• Because the upper rack is removable, insert the upper rack properly to ensure the
dishwasher operates normally.
Pull the upper rack to the front until it is fully extended, and then lift it slightly to remove.
See the following figures.
DW7500RM_DD81-02968G-01_EN.indd 41
• To raise the upper rack, pull the upper
rack upwards. The adjustable handle will
latch, and the upper rack will raise.
• To lower the upper rack, hold both the
adjustable handles located at the left
and right sides of the upper rack, and
then evenly press down.
English
41
2019-10-23
3:50:37