Publicité
Les langues disponibles
Les langues disponibles
310-120
Reinstall Flange
Screw grinding wheel flange knob (4) by
turning clockwise until tightened
Reinstall Wheel Shield
Using a Phillips-head screwdriver,
reinstall the grinding wheel guard (2)
by replacing the three screws
Checking the Assembly
of the Grinding Wheel
Stand at the side of the
grinding wheel
Start the grinder by turning
the switch to position "I"
Visually make sure the grinding
wheel does not oscillate sideways or
crosswise, consequently causing abnormal vibrations
If this should be the case, stop the machine
immediately and check if the grinding wheel
has been fitted correctly If necessary, replace
the grinding wheel with another original one
Always check a freshly fitted grinding
wheel at working speed for at least one minute
before you start grinding, standing at a safe
distance to the side of the grinder, making
sure no one else approaches the machine
Checking the Grinding Wheel Shape
With the machine turned off, check the
grinding wheel (C) profile using the
measuring template (D); if necessary, dress
the wheel to restore the correct profile
Preparing for Use
15
Publicité
