Stahl 8570/21 Serie Mode D'emploi page 23

Main contacts
Auxiliary
contacts
Ex i auxiliary
contacts
287620 / 8570674300
2022‐03‐28·IO00·III·en·00
11201E00
A B
[mm / inch] [mm / inch]
180 / 7.09 10 / 0.39
180 / 7.09 6 / 0.23
180 / 7.09 6 / 0.23
Mounting and Installation
• Open the enclosure.
• Guide the conductors through the
cable entry and into the connection
chamber.
• Strip the conductors.
• Insert the conductors into
the corresponding terminals
and clamp them
(for tightening torque,
see chapter "Technical data").
Insert the stripped cable ends
completely under the terminal.
• Check if the conductors have
been clamped properly.
• Align the conductors. Make sure
that the clamping units are not
under tension.
• Tighten the cable entry/entries.
• Close the enclosure
(for the tightening torque,
see chapter "Technical data").
SolConeX Receptacle, 20 A
Series 8570/21
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
23