Dietz Individual tauronldts Notice D'utilisation page 44

44 3 PREPARING THE PRODUCT FOR USE
3.6 SEAT HEIGHT
1. Use the tool set included in the scope of
delivery to adjust the seat height.
2. To adjust the telescopic legs, undo and
remove the bolts (1, Fig. 15).
3. You can now set the telescopic legs to the
required length (2, Fig. 15), ensuring that
the holes of the inner and outer tubes are
aligned with each other.
4. Finally, reinsert the bolts, attach the nuts
externally and tighten them.
DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.4 EN
WARNING
Risk of trapping: Be careful of your fi ngers
when adjusting the telescopic legs.
Risk of tipping: Set all 4 telescopic legs to
the same length.
Risk of accident: Make sure the bolts are
fi rmly seated.
2
1
Fig. 15