Publicité
Les langues disponibles
Les langues disponibles
4.
Align the side elements so that they are
parallel with each other (Fig. 5). Working
from the front, insert a bolt (M6 x 50 mm)
into each side element on the left and right
(1, Fig. 5). Then secure them fi rmly with the
knurled nuts on the rear of the product
(2, Fig. 5).
5.
To adjust the seat width so that it is right for
you, proceed as follows: Loosen the knurled
nuts on the rear of the backrest cushion
(1, Fig. 6). Tilt the backrest cushion down
towards the fl oor (2, Fig. 6).
6.
The bolts on the rear of the cushion are now
readily accessible and can be easily pulled
out of the cushion (1, Fig. 7).
7.
The middle section inside the backrest is
now free to move. There are three holes on
each side for setting the required seat width
(560/630/700 mm). To adjust the width, pull
the side elements outwards (1, Fig. 8). When
adjusting the seat width, make sure that the
backrest remains centrally aligned.
8.
Once you have selected the required seat
width, reinsert the bolts and secure them
with the knurled nuts.
3 PREPARING THE PRODUCT FOR USE
2
2
1
1
1
1
Fig. 5
2
Fig. 6
Fig. 7
1
1
Fig. 8
41
DE
EN
NL
FR
IT
ES
SE
FI
DK
Publicité
