GE JCB890 Manuel D'utilisation page 21

Slot
Hinge
lock
Pull hinge locks down to unlock.
Removal position
Lift-Off Oven Door
(on some models)
The door is very heavy. Be careful when
removing and lifting the door.
Do not lift the door by the handle.
To remove the door:
Fully open the door.
Pull the hinge locks down toward the door
frame, to the unlocked position. A tool,
such as a small flat-blade screwdriver,
may be required.
Firmly grasp both sides of the door
at the top.
Close door to the door removal position,
which is halfway between the broil stop
position and fully closed.
Lift door up and out until the hinge arm
is clear of the slot.
To replace the door:
Firmly grasp both sides of the door
at the top.
GEAppliances.ca
With the
Bottom
edge of
door at the
slot
same angle
as the removal
position, seat the
indentation of the
Indentation
hinge arm into the
bottom edge of the
hinge slot. The notch in the hinge arm
must be fully seated into the bottom of
the slot.
Fully open the door. If the door will not
fully open, the indentation is not seated
correctly in the bottom edge of the slot.
Push the hinge locks up against the front
frame of the oven cavity to the locked
position.
Hinge
lock
Hinge
arm
Push hinge locks up to lock.
Close the oven door.
Hinge arm
21