Publicité
EC140002
SPECIAL TOOLS
The proper special tools are necessary for complete and accurate tune-up and assembly. Using the
correct special tool will help prevent damage caused by the use of improper tools or improvised tech-
niques. The shape and part number used for the special tool differ by country, so two types are provid-
ed. Refer to the list provided to avoid errors when placing an order.
NOTE:
9 For U.S.A. and Canada, use part number starting with "YM-", "YU-" or "ACC-".
9 For others, use part number starting with "90890-".
Part number
YU-1135-A, 90890-01135
Crankcase separating tool
These tool is used to split the crankcase as well
as remove the crankshaft from either case.
YM-1189, 90890-01189
Flywheel puller
This tool is used to remove the flywheel magneto.
YU-1235, 90890-01235
Rotor holding tool
This tool is used when loosening or tightening the
flywheel magneto securing nut.
YU-3097, 90890-01252
Dial gauge and stand
YU-1256
Spark plug hole dial stand
These tools are used to set the ignition timing.
Crankcase installing tool
YU-90050, 90890-01274
Pot
YU-90050, 90890-01275
Bolt
YU-90063, 90890-01278
Adapter
YM-01499, 90890-01499
Adapter
These tools are used to install the crankshaft.
YU-1304, 90890-01304
Piston pin puller
This tool is used to remove the piston pin.
YM-1312-A, 90890-01312
Fuel level gauge
YM-01470, 90890-01470
Fuel level gauge adaptor
This gauge is used to measure the fuel level in the
float chamber.
Tool name / How to use
1-7
SPECIAL TOOLS
YU-1135-A
YM-1189
YU-1235
YU-3097
YU-1256
YU-90050
YU-90063
YM-01499
YU-1304
YM-1312-A
YM-01470
GEN
INFO
IIIustration
90890-01135
90890-01189
90890-01235
90890-01252
90890-01274
90890-01275
90890-01278
90890-01499
90890-01304
90890-01312
90890-01470
Publicité
