Hoover HFB 6B2S3FX Manuel D'utilisation page 104

Settings Menu
From the settings menu, you can adapt
various parameters to your washing needs.
Accessing the Settings Menu
⚫
Hold the PROGRAMME SELECTION
button down and at the same time press
the ON/OFF button for 3 seconds.
⚫
"SETTING" appears on the display.
⚫
Press the PROGRAMME SELECTION
button again for the menu items to appear
on the display, in the following sequence:
- WATER SOFTENER UNIT
(to set, see the relevant chapter in the
booklet).
- BUZZER
(to set, see the relevant paragraph).
- MEMO FUNCTION
(to set, see the relevant paragraph).
⚫
Press the HALF LOAD or EXTRADRY
button to change the current settings.
⚫
Press PROGRAMME SELECTION again
to scroll through the menu items.
⚫
Press the HALF LOAD and EXTRADRY
buttons together; YES/NO will appear on
the display.
Next time you switch on the
appliance
Press the START/RESET button; the
"ECO" programme will appear on the
display.
If memo mode is enabled, the memorised
programme will appear on the display.
Changing language
⚫
Press the OPEN DOOR and HALF
LOAD buttons together for 5 seconds.
⚫
"ENGLISH" appears on the display.
⚫
Follow the
"LANGUAGE SETTING" paragraph.
WARNING
This procedure will cancel all stored
settings, and the appliance will be
reset to the default factory settings.
Programme settings
⚫
Open the door and place dirty dishes
inside the appliance.
⚫
Either "ECO" programme will appear on
the display, or the programme that was
previously stored.
⚫
The duration of the programme will be
displayed to the left of the ring, while the
programme temperature will be displayed
to the right.
⚫
Select the desired programme by pressing
the PROGRAMME SELECTION button
several times.
⚫
Icons will light up on the display upon
enabling certain programmes.
⚫
To select an option, press the corresponding
button (the indicator light will turn on).
⚫
Press the "START/RESET" button.
104
steps detailed in the