Teddington SECO STEEL 80 Manuel Technique page 26

EN
POWER LED: This LED is lit if the appliance is enabled to work (via ON-OFF key).
If the machine is connected to the power supply, the display shows the relative humidity value.
ALARM LED: This LED, if lit, indicates the presence of an alarm. The display will show the error
message.
WORKING LED: This LED is lit while the appliance is working. It flashes during compressor pauses and
defrosting.
FULL LED: This LED, if on, indicates that the tank is full or the pump is in alarm (if applicable).
ON-OFF: Press the ON / OFF button to switch the appliance on and off.
Note: when the appliance is turned off and immediately on, the compressor does not start immediately.
After 210 seconds, the appliance restarts.
SET HUMIDITY %: Press the keys to set the desired set point value.
HOUR COUNTER: Press the HOURS button to view the operating hours.
PUMP
: Press the PUMP button to force emptying.
If there is no water in the pump, do not force the emptying or the pump will be damaged.
Normally the pump is automatically started/stopped by the pump's internal sensor.
26 M.SECO STEEL 80-02 Manual_ITA_UK_DE_FR_ES - 09/03/2021