Teddington SECO STEEL 80 Manuel Technique page 25

3.6 Overview
4 Start up
4.1 Preliminary checks
4.2 Control panel
Warning: The device must not be placed in confined spaces, which do not allow adequate diffusion
in the room of the air coming from the front grill.
Warning: Do not place or hang objects on the front panel, it may cause damage to the unit
Warning: Attention: Before any maintenance on the electrical section, make sure that the power
supply is disconnected.
Warning:
Check that the power supply voltage corresponds to the unit nominal data (voltage, frequency)
shown on the plate on the unit. The power connection is via plug with cable.
Attention:
Grounding is mandatory.
Warning: Check that power cable is properly connected.
Warning: before starting up, check that all the cover panels are in the correct position and are
locked with fixing screws. Attention: before starting up, check that all the cover panels are in the
correct position and are locked with fixing screws.
Warning: For temporary shutdown (night, weekend, etc.) never interrupt the power supply and
follow the procedures illustrated in the paragraph on device shutdown
The units are equipped with a led signalling panel that indicates the operating status of the unit.
Below is a brief description of their meaning.
M.SECO STEEL 80-02 Manual_ITA_UK_DE_FR_ES - 09/03/2021
EN
25