Publicité
Les langues disponibles
Les langues disponibles
Parts Needed (Provided in the Bump Out Mounting Kit)
Part
13" ~ 14" L Bracket
Bump Out Mounting
Plate Folded
14" ~ 15" M and N
Bracket
15" ~ 16" P and R
Bracket
Wall Template
Upper Cabinet Template
Bump Out Kit Installation
Instruction
Keep the mounting plate and cardboard template provided with the microwave oven for future use if necessary.
Location Requirements
Check the opening where the microwave oven will be installed.
The location must provide:
Minimum installation dimensions. See the "Installation
■
Dimensions" illustration.
Minimum one 2" x 4" (51 x 102 mm) wood wall stud and
■
minimum 3/8" (10 mm) thickness drywall or plaster/lath within
cabinet opening.
Support for weight of 150 lbs (68 kg) which includes
■
microwave oven and items placed inside the microwave oven
and upper cabinet.
Grounded electrical outlet inside upper cabinet. See the
■
"Electrical Requirements" section.
NOTE: Some cabinet and building materials are not designed to
withstand the heat produced by the microwave oven for cooking.
Check with your builder or cabinet supplier to make sure that
the materials used will not discolor, delaminate, or sustain other
damages.
Drawing
Description
Folded Mounting plate with L
bracket unfold before installation
M side for 14" (35.6 cm) ~ 14
(36.8 cm) depth N side for 14
(36.8 cm) ~ 15" (38.1 cm) depth
P side for 15" (38.1 cm) ~ 15
(39.4 cm) depth R side for 15
(39.4 cm) ~ 16" (40.6 cm) depth
Wall Template
Upper cabinet template for 13"
(33 cm) to 16" (40.6 cm) depth
cabinet
Installation Instruction
Special Requirements
For Wall Venting Installation Only:
Cutout must be free of any obstructions so that the vent fit
■
properly and the damper blade opens freely and fully.
For Roof Venting Installation Only:
If you are using a rectangular-to-round transition piece, the
■
3" (76 mm) clearance needs to exist above the microwave
oven so that the damper blade can open freely and fully. See
"Rectangular to Round Transition" illustration in the "Venting
Design Specifications" section on the Owner Manual on the
product.
Quantity
Where can find?
1
⁄
"
1
2
⁄
"
1
1
2
⁄
"
1
2
⁄
"
1
1
2
Bump out mounting
kit
1
1
1
3
Publicité
