Removing The Oven Bottom Cover - Jenn-Air 720-0727 Instructions D'installation Et Guide D'utilisation Et D'entretien

4. Loosen the screw securing the light assembly to the grill
hood and pull out the light with glass light cover.
A
B
A. Screw
B. Light assembly
5. To remove glass light cover, remove screw and gently pry
downward with a small flat-blade screwdriver at the left edge
of the cover near the screw and pull away from the retainer.
Pull out the clamp from the end of the light assembly.
A
6. Use a flat-blade screwdriver to remove the screw locking the
bulb in place.
A
30
A. Clamp
A. Screw
7. Remove bulb from socket.
8. Replace bulb with a new 12-volt, 10-watt maximum, halogen
bulb, using a tissue or wearing cotton gloves to handle the
bulb. To avoid damaging the bulb, do not touch the bulb with
bare fingers.
A
9. Tighten the two screws to lock the bulb into place.
10. Replace glass light cover onto light assembly. Secure light
assembly into the grill hood with the removed in Step 4.
Secure light cover onto grill hood with four screws removed in
Step 3.
11. Plug in grill or reconnect power.

Removing the Oven Bottom Cover

The oven bottom cover can be removed for standard cleaning of
the oven.
Before cleaning, make sure the oven is completely cool.
To Remove:
1. Remove the oven racks.
2. Remove oven bottom cover by lifting up and out.
1
A. Oven bottom cover
To Replace:
Reverse the steps above.
A. Bulb
A