Publicité
FRONT BRAKE (TT-R125LW)
ASSEMBLY AND INSTALLATION
WARNING
All internal parts should be cleaned in
G
new brake fluid only.
Internal parts should be lubricated with
G
brake fluid when installed.
Replace the brake caliper piston seals
G
and brake caliper dust seals whenever a
brake caliper is disassembled.
Brake caliper piston
1. Clean:
G
G
G
G
2. Install:
G
G
WARNING
Always use new brake caliper piston seals
and brake caliper dust seals.
NOTE:
Fit the brake caliper piston seals and brake
caliper dust seals onto the slot on brake cali-
per correctly.
3. Install:
G
NOTE:
Apply the brake fluid on the brake caliper pis-
ton wall.
CAUTION:
Install the brake caliper piston with its
G
shallow depressed side a facing the
brake caliper.
Never force to insert.
G
Brake caliper
1. Install:
G
5 - 17
CHAS
Brake caliper
Brake caliper piston seal
Brake caliper dust seal
Brake caliper piston
Clean them with brake fluid.
Brake caliper piston seal 1
Brake caliper dust seal 2
Brake caliper piston 1
Sleeve boot 1.
On brake caliper bracket 2.
New
New
Publicité
