Qlima P 628 black Manuel D'utilisation page 66

Fig. 5 & 5a
Fig. 6
4
66
man_P2xx_PH6xx-EU ('22) V3.indd 66 man_P2xx_PH6xx-EU ('22) V3.indd 66
C
OPERATION
1 2
1. Timing button
2. Mode button
3. Down button
4. Up button
5. Speed button
6. Switch button
Icon and Interpretation
Sleep indicator
Timing indicator
Heating indicator*
Fan indicator
Dehumidification
indicator
*Cooling & Heating model only.
Before starting operations in this section:
1) Find a place where there is power supply nearby.
2) As shown in Fig.5 and Fig.5a, install the exhaust hose, and adjust the window
position well.
3) As shown in Fig. 6, connect drain hose well (only for using heating model)℃
4) Insert the power cord into an grounded AC220~240V/50Hz socket;
5) Press the POWER button to turn on the air-conditioner.
1.Before using
Notice:
- Operation temperature range:
Maximum cooling Minimum cooling
DB/WB(°C) 35/24 18/12
Maximum heating Minimum heating
DB/WB(°C) 27/--- 7/---
Check up whether the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
- When using functions on cooling and dehumidifying, keep an interval of at least
3 minutes between each ON/OFF.
- Power supply meets the requirements.
 4 5
Cold indicator
Swing indicator
High speed indication
Medium speed
indication
Low speed indication
6
WiFi Manual
www.qlima.com
Full water indicator
20-12-2022 15:59 20-12-2022 15:59