Disposal; Manufacturer's Warranty - Tools - Hilti SMD 57 Mode D'emploi

3. Press the release spring together with the aid of
pliers or a similar tool. The transport mechanism,
including the depth gauge, can then be removed
from the casing. You now have three assemblies in
your hand: the transport mechanism, the pressure
spring and the casing.
4. If necessary, the depth gauge can also be separated
from the other parts by pulling it out while pressing
en
the screw length adjustment button.
NOTE Take care to avoid pinching your fingers.

10 Disposal

Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information.

11 Manufacturer's warranty - tools

Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so long
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or re-
placement of defective parts only over the entire lifespan
of the tool. Parts requiring repair or replacement as a
result of normal wear and tear are not covered by this
warranty.
10
5. The parts can then be cleaned thoroughly with warm
water.
NOTE We recommend use of a nylon brush (an old
toothbrush) to remove stubborn deposits.
9.1.2 Assembly after cleaning
Assembly is carried out in the reverse order.
Operate the transport movement once or twice to check
that the magazine is functioning correctly after cleaning
and reassembly.
Additional claims are excluded, unless stringent na-
tional rules prohibit such exclusion. In particular, Hilti
is not obligated for direct, indirect, incidental or con-
sequential damages, losses or expenses in connec-
tion with, or by reason of, the use of, or inability to
use the tool for any purpose. Implied warranties of
merchantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send the tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.