LaserLiner MeterMaster Plus Mode D'emploi page 11

All manuals and user guides at all-guides.com
Important notices
measurement area, up to which measurement takes place.
measurement takes place too close to walls, the resulting reflections
can cause false measurements. Wherever possible, verify the measured
distances along a clear line of sight.
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
deviations, and wind noises and other sources of sound can also
falsify the results.
Therefore in such cases please use smooth surfaces as aids, such
as shelves, mirrors etc.
the housing.
Technical Data
(Subject to technical changes without notice 11.14)
Measurement range
Precision
Laser class
Laser wavelength
Power supply
Dimensions (W x H x D)
Weight (incl. battery)
Automatic switch-off
Error code:
Err: Please measure once more
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
MeterMaster Plus
0,6 m ... 13 m
< 0,5%
2 < 1 mW
650 nm
Type 9V E block
63 x 131 x 38 mm
0,15 kg
30 sec.
0 °C ... 40 °C
11
GB