Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
EN
The numbers in the text refer to the diagrams on pages 2.
For your own safety and that of others, we recommend that you
read this instruction manual carefully before using this staple gun.
Keep this instruction manual and the documentation provided with the
staple gun for future reference.
Contents
1.
Machine information
2.
Safety instructions
3.
Operation
1. MACHINE INFORMATION
Technical specifications
Environment of use
Range (typical)
Measurement accuracy (typical)
Smallest unit of display
Units
Approximate diameter (divergence)
of laser beam at 20m
Laser class
Type of laser
Automatic stop
Automatic stop of laser
Batteries
Approximate service life of batteries in measurement mode
Operating temperature
Storage temperature
Weight
Dimensions
The rangefinder can be used for taking indoor measurements within an altitude
range of 0 to 2000 m with a humidity range of 0% - 80%.
*The extent of the range depends on the quality of the laser light reflected by
the target (diffuse reflection, non-reflective surface) and the degree of brightness
of the laser spot with respect to the ambient light (indoor premises, dusk). In
unfavourable conditions (for instance very powerful indoor lighting or low-
reflective surface), the range may be less than that indicated.
**In unfavourable conditions (for instance very powerful indoor lighting,
low-reflective surface or ambient temperature far from 25°C), the maximum
divergence may reach ±7 mm.
***In unfavourable conditions, an influence of approximately ±0.05 mm/m
should be expected.
LASER DISTANCE MEASURE
4.
Service & maintenance
5.
Warranty
6.
Declaration of conformity
Recommended indoors
0,03-20m*
±5mm***
1mm
m/in/ft
± 20 mm**
2
620-670 nm, <1mw
45 sec.
15 sec.
2 x 1,5V LR03 (AAA)
~5000 mesures
-10°C~40°C
-20°C~60°C
45gr.
90x40x24mm
40
Publicité
Table des Matières
