4) Press "ENTER" again, or wait for a few seconds for "Charging Test" to initiate:
Charging Test
Increase RPM to 2500 r/min and k eep
it 5 seconds.
Press ENTER to continue .
5) The screen will display instructions for the technician to press vehicle
accelerator to increase RPM to 2500r/min and maintain 2500 r/min for 5
seconds. Press "ENTER" to display the test result:
Charging Test
Loaded
Unloaded
Ripple
CHARGING LOW
Reference Table (for 12V battery)
Status
Battery Voltage
13.2V~15.0V
12.9V~13.2V
Headlamps & A/C OFF
( Depress Accelerator )
12.7V~12.9V
<12.7V
13.3V~14.6V
Headlamps & A/C ON
13.1V~13.3V
(Depress Accelerator)
<13.1V
* For reference only. Poorly functioning batteries can affect the test data.
8
12.95V
12.95V
20mV
Engine Performance
Normal
General
Attention
Inspection ASAP
Normal
Attention
Inspection ASAP
4. Review Data
4.1
Press the "M" button to display the Main Menu, and select
1. Batte ry Test
2. Cranking T est
3. Char ging Test
4. Review Data
5. Languag e
4.2
Press "ENTER" to display "Review Data" screen:
Healthy:
Charge:
Internal R=
Rated:
GOOD BATTERY
Note: Tool saves the results of the last test, not all testing data.
Technical Specification
Display: 128x64 LCD display
Working Temperature: -20°C~65°C (-4°F~140°F)
Storage Temperature: -20°C~70°C (-4°F~158°F)
Dimensions: 136.5mm * 75.5mm * 22.5mm
Weight: 260g
Warranty
TOPDON Two Years Limited Warranty
The TOPDON Company warrants to its original purchaser that TOPDON products
will be free from defects in material and workmanship for 24 months from the date
of purchase (Warranty Period). For the defects reported during the Warranty Period,
TOPDON will, according to the technical support analysis and confirmation, either
repair or replace the defective part or product.
This limited warranty is void under the following conditions:
Misused, disassembled, altered or repaired by a non-TOPDON technical
repair specialist.
Careless handling and violation of operation.
"4. Review
Data":
Main Menu
Battery Test
60%
250CCA
98 %
12.95V
11.96mΩ
300A
9