Setting The Clock; Cd Player Operation; Playing A Cd; Ejecting The Cd - Sony CDX-2100 Mode D'emploi

Setting the Clock

The clock has a 12-hour digital indication.
For example, setting it to 10:08
1
Display the time.
(Press the or
OFF DSPL
unit operation.)
2
Press the button for more than two
DSPL
seconds.
100
The hour digit(s) blinks.
Set the hour digits.
to go forward
to go back
1000
3
Press the SEL button momentarily.
1000
The minute digits blink.
Set the minute digits.
to go forward
to go back
1008
4
Press the button momentarily.
DSPL
The clock activates.
Note
If the car has no accessory position on the ignition key
switch, the clock cannot be set unless the power is turned
on. Set the clock after you have turned on the radio, or
during CD playback.
Actual total number:

CD Player Operation

Playing a CD

button during
After inserting the CD, playback will
start from the first track automatically.
If a CD is already inserted, press the CD
button to start playback.
When the unit starts CD playback, the
elapsed playing time will be displayed.
To display the elapsed playing time and the
track number alternately, press the
button.
Elapsed playing time
When the last track on the CD is over,
the track number indication will return to "1",
and playback will continue from the first track
of the CD.
Note
To play a 8 cm (3 in.) CD, use the optional Sony compact
disc single adapter (CSA-8).
To stop playback,
eject the CD by pressing the
press the
Playback stops also when you select another
source (radio) by pressing the FM/AM button.

Ejecting the CD

Press the
Note
If you leave the ejected disc in the disc insertion slot after
you have pressed the 6 button, the disc will automatically
retract into the unit after about 15 seconds in order to
protect it.
Label side up
MIN SEC
215
button.
OFF
button.
E
Sony CDX-2100 ( ,F) 3-810-607-11(1)
EN
DSPL
button or
5