Télécharger Imprimer la page

Inventum IKA8045 Manuel D'utilisation page 35

Publicité

Les langues disponibles

Les langues disponibles

Note:
When the child lock is activated, all the controls are disabled except the on/off button. You can always
turn the appliance off with the on/off button in case of an emergency, but you need to unlock the
appliance first before the next use.
Locking the appliance
1. Make sure that the appliance is on.
2. Touch and hold the child lock button for 3 seconds. The operation indicator shows "L" when the appliance is
locked.
Unlocking the appliance
1. Touch the child lock button for a few seconds. The operation indicators show "-" or the current setting when the
appliance is unlocked.
POWER MANAGEMENT
Make sure the appliance is installed and connected according to the separately supplied installation manual.
It is possible to set a maximum power consumption level for the induction hob, choosing up to 5 different power
ranges.
Induction hobs are able to limit themselves automatically in order to work at a lower power level, to avoid the risk
of overloading.
MAXIMUM POWER
Depending on the electrical connection and the setting of the power management, the appliance has a maximum
power of:
Power
7.400 watts
5.800 watts
4.500 watts
3.500 watts
2.800 watts
The power will be divided between all four cooking zones. It is possible that the maximum available power for the
cooking zones together is exceeded. This can cause "switching" of the power between the cooking zones. In that
case, it is possible that the power of the second cooking zone can only be set to a lower level. When you use three or
four cooking zones at once, the possible maximum power level will even be lower.
SETTING THE POWER MANAGEMENT
Use the power management mode to set the total maximum power of the appliance.
Note:
As a default, the appliance is set to 7.4 kW. The possible settings are: 2.8, 3.5, 4.5, 5.5 or 7.4 kW.
1. Do not turn on the appliance. Activate the child lock in the power off state.
2. Press the rear left Boost button for 3 seconds. The buzzer sounds.
3. Press the front left Boost button for 3 seconds. The buzzer sounds and the current value appears.
The letters PO will appear in the operation indicator of the rear left cooking zone.
The digits 74 will appear in the operation indicator of the front left cooking zone.
The digits 00 will appear in the operation indicator of the front right cooking zone.
Display
PO
74
PO
58
PO
45
PO
35
PO
28
00
00
00
00
00
English
35

Publicité

loading