Index
1. General
2. Type of rolling tower
3. Safety instructions
4. Parts
5. Mounting instructions
6. Assembly
7. Check before use
8. Weight and ballast
9. Moving the rolling tower
10. Disassembly of the rolling tower
11. Inspection, Care and Maintenance
12. Warranty conditions
1. General
This manual applies exclusively to folding and rolling tower configurations (hereinafter: 'the scaffold) as described in this assembly & user
manual (hereinafter: 'the manual'). Prior to starting to assemble the tower, you should carefully read this manual. The required tower
should be assembled and used in accordance with this manual.
Reading Instruction
The manual refers to annexes. These annexes appear at the front of the manual and are indicated by the letter T followed by a number.
WARNING: a fall from scaffolding can cause serious injury or death. All instructions in this manual have to be strictly adhered to. If the
instructions contained in this manual are not followed, accidents may arise. The supplier may not be held liable for any damage as a
result of non-compliance with the guide regarding the assembly and use of the scaffold.
The employer, supervisor and user are responsible for the correct use of the scaffold in accordance with this manual and they must
ensure that this manual is available at all times when work is being carried out using the scaffold. Additional copies of the manual can be
ordered from the supplier.
Note:
•
The manual must be available with the scaffold during assembly and use.
•
The scaffold may only be assembled and used in accordance with this manual without making any modifications.
•
Scaffolding may only be assembled and used in accordance with local laws and regulations. Local legislation and
regulations may contain supplementary measures on top of this guide.
•
Make sure you are familiar with the assembly and use of the rolling tower. Study the manual carefully and follow specific
training if necessary.
•
Employees charged with conversion, maintenance, repair or cleaning must have specific expertise and experience in
accordance with national (working conditions) legislation.
•
A product training course does not replace a manual but gives additional explanation.
2. Type of rolling tower
Norm:
Category
Access category
Maximum platform height outdoors
Maximum platform height indoors
Maximum platform load
Maximum load on rolling tower
Maximum wind load in operation
Minimum number of assembly persons
Intended Use: This rolling tower is intended for intensive use within the framework described in this manual
Supplier: Wienese
Annexes
T1. Icons
T2. Parts
T3: Mounting instruction
T4. Assembly
T5. Configurations
EN1004
3 - H2
XXXD
4 m
4 m
150 kg m2
150 kg
7,9 m/s (max. 4 Beaufort)
1
*) 4 Beaufort: small branches move,
raises dust and loose snow, on a lake
waves become longer with fairly
frequent white horses.