Hansgrohe AXOR Uno 38117 1 Serie Instructions De Montage / Mode D'emploi / Garantie page 2

38118xx1
A11.18.1-005
CSA B15.1-005
ICC/ANSI A117.1
38117xx1
Tools Required / Outiles Utiles /
Herramientas Útiles
8 mm

A11.18.1-005
CSA B15.1-005
ICC/ANSI A117.1
17 mm
30 mm
27 mm
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This faucet requires rough 136181 (not
included). The rough must be installed and the
finished wall completed and made watertight
before installation of the trim kit.
This trim is not compatible with
old-style rough 38111181.
• If rough 38111181 is already installed,
please contact Hansgrohe Technical Ser-
vice regarding the additional parts and
special instructions necessary to install
this trim kit.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
1.5 GPM