Deposits - HBM U93 Notice De Montage

U93

4.3 Deposits

Dust, dirt and other foreign matter must not be allowed to accumulate suffi­
ciently to divert some of the measuring force, thus invalidating the measured
value (force shunt).
NOTE
Measurement errors may be the result if dust or dirt is deposited inside the
force transducer. The relevant areas are marked by arrows in Fig. 4.1.
Fig. 4.1: Avoid deposits in the marked areas
A2081-2.2 en/de/fr
The gap below the flange face must
not become clogged with foreign
matter.
11
HBM