Care And Cleaning; Recycling And Environmental Protection - Elster RGV Mode D'emploi

Table des Matières

Les langues disponibles

–

The assignment of the lower two terminals in the connection box of the encoder counter

determines the direction of gas flow:

Bridge on lower terminals (as delivered): Upper counter is activated

Flow direction: from bottom to top or from right to left

Figure 10: Flow from bottom to top or from right to left, lower terminals assigned

Lower terminals unassigned: Lower counter is activated

Flow direction: from left to right or from top to bottom

Figure 11: Flow from left to right or from top to bottom, lower terminals unassigned

A pulse generator (Type LF) may be connected for pulse output to external devices (e.g. a

volume corrector). Fit the pulse generator (if required) as described above in section 11.

16. Care and Cleaning

–

Clean off dirt on the meter only with a damp cloth.

–

Do not clean the meter and its accessories with solvent.

–

Any media gentle on the applicable materials can be used as cleaning media.

Elster-Instromet has reduced the transport packagings of the measuring instruments to the

bare essentials. Packaging materials are always selected consistently with a view to

recycling. The cardboard items used constitute secondary raw materials for the paperboard

and paper industry. The Instapak

Counter is adding

foam packaging items are recyclable and can be reused.

Elster-Instromet

Table des Matières

Table des Matières

Rgv-st