Operation; Function Of Displays; Function Of Buttons - SKF TIH 100m Mode D'emploi

5. Operation

5.1 Function of displays

• The remote control display shows the selected
time or temperature for heating.
• The power LED's show the selected
power setting.
Display Indication
t time in minutes
°C temperature in degrees Celcius
°F temperature in degrees Fahrenheit

5.2 Function of buttons

Button
POWER
MODE
UP (+)
DOWN(-)
START / STOP
10
Function
Press to adjust the power. The selected power is indicated with an LED
Press to switch between TIME MODE and TEMP MODE
Press to increase the value shown on the remote control display
Press to decrease the value shown on the remote control display
Press to start or stop the heater. The LED on the START/ STOP
button is lit when the heater is heating and lashes during
temperature measurement
50% 100%
START
POWER
STOP
TIH RC
SKF TIH 100m