Télécharger Imprimer la page

Lux Tools E-VL-1800/36 Notice Originale page 25

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
All manuals and user guides at all-guides.com
Vertikutierer_401116.book Seite 25 Dienstag, 12. April 2016 3:19 15
Important information
DANGER! Danger of injury! –Always keep
the extension cable away from the
machine.
– Wherever possible, work across the
slope.
– Never start the machine on a solid sur-
face.
– If the working roller becomes blocked
by a solid object, release the start-up
lever immediately.
– If a foreign body was picked up, check
the machine and have it repaired if nec-
essary.
• For an improved result, and to lengthen the
machine's working life, the lawn should be cut as
short as possible.
• Staying for too long in one place can damage the
lawn surface.
Cleaning and maintenance
DANGER! Danger of injury! Prior to any
maintenance and/or cleaning:
– Switch the machine off.
– Pull out the plug.
WARNING! Danger of injury! The work-
ing roller runs on!
– Never turn the machine over, or lift or
carry it when the motor is running.
– Prior to any maintenance and/or clean-
ing, wait until the machine has come to
a stop.
WARNING! Danger of injury! Perform
only the maintenance steps described here.
Have all other work, in particular motor
maintenance and repairs, conducted by a
trained technician. Improperly performed
work may cause damage to the machine
and may result in injury.
Cleaning and maintenance overview
Prior to every start
What?
How?
Check mains plug and ca-
Inspect visually and, if
ble for damage.
necessary, have the
parts replaced by a
trained electrician.
Check all screwed con-
nections and tighten them
if necessary.
Fault/malfunction
Motor does not run.
Cause
No mains voltage?
Connection cable defective?
What?
How?
Remove all grass and
Remove them with a vac-
moss from the ventilation
uum cleaner or a brush.
slits of the motor.
Cleaning the machine
The machine should be cleaned immediately after
each use. Grass residue which dries in place is very
hard, and can be removed only with difficulty.
– Empty the collecting sack.
– Remove grass residue with a brush and a plastic
scraper if necessary (do not use sharp equip-
ment).
– Remove deposits from the wheels.
– Wipe the machine with a slightly damp cloth
– Never clean with water or a high pressure jet.
Storing, transport
Storing
DANGER! Attention, danger of injury!
Store the machine in such a way that it can-
not be started by unauthorised people and
that it is inaccessible to children.
Ensure that no-one can be injured by the
machine when stationary.
NOTICE! Risk of machine damage! Do
not store the machine in damp areas with-
out protection.
– Store the machine where it is dry and well venti-
lated.
Transport
– If shipping, use the original packaging wherever
possible.
Malfunctions and troubleshooting
In the event of a malfunction...
DANGER! Danger of injury! Improperly
conducted repairs may prevent your
machine from working safely. Such repairs
will endanger you and your surroundings.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the
vendor. You will save yourself a lot of trouble and
possibly money too.
Remedy
Check cables, plug, socket and fuse.
Contact your local vendor.
GB
25

Publicité

loading

Ce manuel est également adapté pour:

401116