the appliance. After that, operate the hob at
minimum position for 20 min. During this period,
an odour and smoke can occur. This is normal.
Make sure that the airflow is sufficient.
Using the rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up faster
than usual plates. The red dots are painted on
the plates. They can deteriorate during use and
even disappear completely after a period of
time. It does not have an effect on the
performance of the hob.
The heat setting
To set or change the heat setting turn the knob
to the correct heat setting. To deactivate turn
the knob to off position.
Power indicator activates when one or more
cooking zones are activated. When you
deactivate the cooking zones the indicator
deactivates.
Timer
Count Down Timer
You can use this function to set how long the
hob operates.
Hints and tips
WARNING!
Refer to Safety chapters.
Cookware
The bottom of the cookware must be
as thick and flat as possible.
CAUTION!
Do not use cast iron pans,
potstones, earthenware, grill or
toaster plates. The stainless steel
can become tarnished if it is too
much heated.
Examples of cooking applications
Heat
set-
ting:
1
Keeping warm
16
Application:
First set the heat setting.
To activate the function: turn the knob for
the timer as far as possible. Then turn it to the
correct time period value.
When the time comes to an end, the
sound operates and the hob
deactivates.
Minute Minder
You can use the timer as a Minute Minder.
First set the heat setting to off position.
To activate the function: turn the knob for
the timer as far as possible. Then turn it to the
correct time period value.
To operate the hob manually turn the
knob for the timer to
Heat
set-
ting:
2
Gentle simmering
3
Simmering
4
Frying / browning
5
Bringing to the boil
6
Bringing to the boil / quick frying /
deep-frying
.
Application:
www.zanussi.com