Oregon Scientific RRM902 Mode D'emploi page 4

6. DIMMER: select display brightness
7. COLOUR (OFF·PROGRAM·LOOP):
deactivate color-changing light show; select pre-
SURJUDPPHG VRXQG VSHFL¿F OLJKW VKRZ RU UDLQERZ
loop effect
8. : set clock
9. Z Z : activate sleep timer; adjust timer settings (120, 90,
   
10. VOL+ / VOL-: increase / decrease value
of the setting; increase / decrease volume
11. RESET: reset unit to default settings
12. SEARCH: initiate sensor search
13. PAUSE: VHOHFW D VSHFL¿F FRORU OLJKWLQJ UHVWDUW FRORU
changing effect
14. Socket for audio line-in
BOTTOM VIEW
1. Adapter socket
2. Battery compartment
All manuals and user guides at all-guides.com
activate /
3
REMOTE SENSOR
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole: reset unit to default settings
5. CHANNEL switch: select Channel 1
GETTING STARTED
POWER SUPPLY
Adapter
The adapter powers the unit. Plug adapter into socket,
making sure the adapter is not obstructed and is easily
accessible to the unit.
To completely disconnect from power, the adapter should be
disconnected from the main unit.