Publicité
All manuals and user guides at all-guides.com
Following table describes the expansion board jumpers.
Name
Adaption to the input signal of analog input 1
S2
ON 0...20mA / 4...20mA
OFF 0...10V / -10V...-10V
Adaption to the input signal of analog input 2
S3
ON 0...20mA / 4...20mA
OFF 0...10V / -10V...-10V
I/O available depending on drive firmware version
Drive firmware
Digital Inputs
Digital Outputs
Analog Inputs
Analog Outputs
+5V ____________________ The led is lit when internal +5V power supply is
+15V ___________________ The led is lit when +15V power supply is provided by
-15V ___________________ The led is lit when -15V power supply is provided by
18
—————— I/O Expansion card ——————
GEI-100427A
Chapter 4 - JUMPERS
JUMPERS ON BOARD
Description
1.X
4
6
-
2
Chapter 5 - LEDs
available from the Drive.
the Drive
the Drive
Default
OFF
OFF
expDA50
from 2.X
12
8
2
4
expDA75
Publicité
