Li-Ion Battery - shark ROCKET IX160 Série Guide D'utilisation

Your vacuum comes equipped with either a standard wand or a MultiFLEX® wand and either a standard floor
nozzle or a Dirt Engage™ floor nozzle. All versions assemble the same way.
1. Insert Wand into Floor Nozzle.
2. Insert Handheld Vacuum into wand.
For proper operation, ensure all components are completely connected and clicked into place.
2.
Standard
Wand
1.
Standard
Floor Nozzle
NOTE: Your vacuum's model number is located on the QR code label on the bottom of the handheld vacuum.
s h a r kc l e a n . c o m
ASSEMBLY
2.
MultiFLEX
OR
Wand
1.
Dirt Engage
OR
Floor Nozzle

LI-ION BATTERY

The Shark Li-Ion battery does not come fully charged. Prior to first use, charge completely.
RUNTIMES PER FULLY-CHARGED BATTERY
To see the runtime of your Shark® cordless vacuum consult the Quick Start Guide or visit sharkclean.com/
support.
LED BATTERY POWER AND CHARGING INDICATORS
RECYCLING THE LI-ION BATTERY
When your Shark Li-Ion battery needs to be replaced, dispose of it or recycle it in accordance with local
ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a
municipal solid waste stream. Return spent batteries to an authorized recycling center or to the retailer for
recycling. Contact your local recycling center for information on where to drop off the spent battery.
Charging
Low Mid
Charge Charge
Nearly Full
Full Charge
NOTE: Full charge takes approximately 3 hours.
In Use
Full Mid Low
Charge Charge Charge
Nearly No
Empty Charge
s h a r kc l e a n . c o m