Functional Description - Milwaukee M 18 Manuel De L'utilisateur

Coupe-câble

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

• Do not expose a battery pack or tool to fire or ex-

cessive temperature. Exposure to fire or temperature

above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging im-

properly or at temperatures outside the specified range

may damage the battery and increase the risk of fire.

SERVICE

• Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

• Never service damaged battery packs. Service of

battery packs should only be performed by the manu-

facturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

CABLE CUTTER

• Do not use tool without cutting jaws installed.

Fingers could be crushed.

• Blade is sharp. Keep hands away from all cutting edges

and moving parts. Laceration and amputation can occur.

• To reduce the risk of injury, wear safety goggles or

glasses with side shields when operating or servic-

ing the tool. Material may crack or shatter.

•

To reduce the risk of arc flash,

WARNING

electric shock and property

damage, work on deenergized lines when pos-

sible. Tool is not insulated. Should work on

energized lines be required, ensure all proper

precautions, including those contained in NFPA

70E, have been taken first.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every situation

that could result in a dangerous outcome. Do not use this

tool if you do not understand these operating instructions

or you feel the work is beyond your capability; contact

Milwaukee Tool or a trained professional for additional

information or training.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to filter

out microscopic particles.

SPECIFICATIONS

Cat. No. ..................................................... 2672-20

Volts ...................................................................18 DC

Battery Type ..................................................... M18™

Charger Type ................................................... M18™

Jaw Type ..........................................477 ACSR Jaws

Maximum Capacity ...... ACSR: 477 MCM Hen ACSR

Replacement Blades .................. Cat. No. 48-44-0412

Jaw Type ..................................... 750 MCM Cu Jaws

Maximum Capacity ..............Copper Cable: 750 mcm

Replacement Blades .................. Cat. No. 48-44-0411

* 750 MCM Cu Jaws will cut any aluminum cable with

a diameter less than 1.225"

Jaw Type ............................1/2" EHS Guy Wire Jaws

Maximum Capacity EHS Guy Wire: 1/2" (19 strand)**

Non-EHS Guy Wire: 1/2" (7 & 19 strand)**

Replacement Blades .................Cat. No. 48-44-2777

** May require two cutting cycles to complete cut on

1/2" wire

Jaw Type ........................... Fine Stranded Wire Jaws

Maximum Capacity ..................... Fine Stranded Wire:

Replacement Blades .................Cat. No. 48-44-2778

*** Jaws should only be used on the following wire

classes: M, K, I/DLO