Functional Description - Milwaukee FORCELOGIC M18 1590 ACSR Manuel De L'utilisateur

• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explo-
sion or risk of injury.
• Do not expose a battery pack or tool to fire or ex-
cessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
• Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
• Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
CABLE CUTTER
• Keep hands away from all cutting edges and mov-
ing parts. Laceration and amputation can occur.
• To reduce the risk of injury, wear safety goggles
or glasses with side shields when operating or
servicing the tool. Material may crack or shatter.
• To reduce the risk of explosion,
WARNING
electric shock and property
damage, do not use on live electrical lines.
Tool is NOT insulated. Contact with a live
circuit could result in severe injury or death. Turn
off power before making a cut. Never cut gas or water
lines.
• Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
• Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
UL Listing for Canada and U.S.
US
C
WARNING
shock and property damage, do not
use on live electrical lines. Tool is NOT
insulated. Contact with a live circuit
could result in severe injury or death.
Turn off power before making a cut.
Never cut gas or water lines.
WARNING
and moving parts. Laceration and
amputation can occur.
To reduce the risk of injury, wear
safety goggles or glasses with side
shields when operating or servicing
the tool.
Read operator's manual.

FUNCTIONAL DESCRIPTION

2
3
1
4
10
11
9
2
8
1. Front blade
2. Jaw release levers
3. Rear blade
4. Blade retaining pin
5. Hanger
6. Handle
SPECIFICATIONS
Cat. No. ..................................................... 2777-20
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Maximum Capacity ..................... 1590 MCM ACSR
Replacement Blades .............. Cat. No. 49-16-2775
3
To reduce the risk of
e x p l o s i o n , e l e c t r i c
K e e p h a n d s a w a y
from all cutting edges
5
6
7
7. LED
8. Reverse switch
9. Trigger
10. Side handle
11. 5 mm hex socket screws
Guy Wire: 5/8"
EHS Guy Wire: 1/2"
Rebar: 5/8"
Ground Rod: 5/8"