Haier WS50GDBI Mode D'emploi page 8

Heading 1
3.
Humidity Display
Humidity display zone will display the humidity inside your wine cellar in real time.
4.
Interior Light
• To complement the look of your wine collection, a soft light has been built into the wine cellar. Simply
push the "Light" button and the light comes on, push again for off. For maximum energy efficiency,
leave light off when not viewing your collection.
• When door is open the light will go on. Upon closing the door, the light will go off.
5.
Circulation Inside Cellar
Press "Circulate" briefly to start up the fan inside the cellar in order to make the temperature inside more uniform.
6.
Celsius/Fahrenheit Conversion
Press "Circulate" and hold it for 3 seconds in order to activate the conversion between Celsius and Fahrenheit.
7.
Power
In the initial status, the power key is in on. If it is not locked, all of the power key icons are on. After
holding the power key for 3 seconds, the main power will turn off (power for all electrical devices inside
will be cut off and the whole appliance will be in standby) and the power key will be half-on. If the device
is off, the power can be turned on by holding the power key for 3 seconds, and then all icons on the
display screen will turn on. After the operation is stopped for 30 seconds, the display screen will be
locked. If the screen is locked, the power key icons are half-on.
8.
Low-Temperature Compensation
This wine cellar has a low-temperature compensation function so as to ensure the stability of the storage
temperature of the wine.
If the ambient temperature is lower than the set temperature, the temperature inside the cellar will fall
accordingly. If the temperature inside the cellar is lower than the shutdown temperature by 2°C(4°F), the cellar
will automatically enable the low-temperature compensation function in order to heat the cellar. If the
temperature inside reaches the set temperature, the low-temperature compensation function will be disabled.
9.
Temperature Power-Off Memory
In case of a power outage, the cellar will automatically save the set temperature. After power recovery,
it will run based on the temperature set before the power outage while other functions will return to the
default status.
8