Haier WS50GDBI Mode D'emploi page 7

Introduction to Primary Functions of the Appliance
Screen
Lock/Unlock
Temperature Zone
1.
Automatic Locking and Unlocking
The appliance has an automatic locking function in order to prevent improper operation of the set operating
conditions and temperature due to accidental triggering.
The "Lock" icon will be displayed and control panel will be locked if operation is stopped for 30 seconds.
3s
Unlocked
In order to unlock the panel, press the key and hold it for 3 seconds. The control panel will be unlocked.
Other keys can be operated when the panel is unlocked.
3s
Locked
2.
Temperature Adjustment
Press "TEMP Zone Selection" briefly in order to select the required temperature zone. If the
selected temperature zone turns on, "TEMP Display Zone" displays the temperature of the current
temperature zone.
After completion of temperature zone selection, press the "TEMP Up/Down" keys briefly in order to
enable temperature settings. At this time, the figures on "TEMP Display Zone" flash and can be set
by pressing the "TEMP Up/Down" keys. The temperature rises by 1°C each time when the Up key
is pressed and falls by 1°C each time when the Down key is pressed. Temperature settings range is
between 5~20°C. After the temperature is selected, operation will be suspended for 3 seconds, and then
the currently set parameter will become the system default. The process of temperature adjustments in
other temperature zones is the same as that given above.
Press briefly
to select
a temperature zone
Control Panel
Temperature
Up/Down
Stop key
operation
for 30s
Press the
Lock key and
hold for 3s
Temperature
Tem-
perature
°F/°C
Humidity
Conversion
3s
Locked
3s
Unlocked
Press Press
once, rise once,
by 1 °C decrease
by 1 °C
Heading 1
This will not flash
after the operation has
stopped for 3 seconds
EN
7