Publicité
Les langues disponibles
Les langues disponibles
EN
OPERATION
Screwdriving operation
Fit the screw on the point of the bit and place the point of the screw on the
surface of the workpiece to be fastened. Apply pressure to the tool and start
it. Withdraw the tool as soon as the clutch cuts in. Then release the trigger.
- When fitting the screw onto the point of the bit, be careful not to push in on
the screw. If the screw is pushed in, the clutch will engage and the screw will
rotate suddenly. This could damage a workpiece or cause an injury.
- Make sure that the bit is inserted straight in the screw head, or the screw
and/or bit may be damaged.
MAINTENANCE
In order to maintain product safety and reliability, repairs, any other mainte-
nance or adjustment should be performed by Authorized or Factory Service
Centers, always using appropriate replacement parts.
Handling and Storage
Care must be taken when handling this product. Dropping this power tool could have an effect on its accuracy and could also result in personal injury. This
product is not a toy and must be respected. Environmental conditions can have a detrimental effect on this product if neglected. Exposure to damp air can
gradually corrode components. If the product is unprotected from dust and debris, components will become clogged. If not cleaned and maintained correctly
or regularly the machine will not perform at its best.
Disposal
At the end of the working life of this power tool or when it can no longer be repaired, ensure that it is disposed of
according to national regulations.— Contact your local authority for details of collection schemes in your area.
In all circumstances:
• DO NOT dispose of power tools along with domestic waste.
• DO NOT incinerate.
• DO NOT dispose of as unsorted municipal waste.
Warning!
• DO NOT mutilate or put battery pack in fire; cells may burst or release toxic materials (corrosive electrolyte).
• DO NOT short circuit cells, may cause burns.
• The battery pack must be removed from the appliance before it is scrapped.
• The battery pack is to be disposed of safely.
• DO NOT dispose of batteries or cells in a charged condition.
Expired batteries must be recycled/disposed of in accordance with the appropriate regulation or legislation.
They should be returned to your local warranty agent/stockist.
12
- Never use gasoline, benzine, thinner alcohol or the like. Discoloration, defor-
mation or cracks may result.
- Always be sure that the tool is switched off and the battery cartridge is re-
moved before attempting to perform inspection or maintenance.
WWW.NIKOLAOUTOOLS.GR
Publicité
