Publicité
Les langues disponibles
Les langues disponibles
Using your Induction Hob
To start cooking
After power on, the buzzer beeps once, all the indicators light up for 1 second then
•
go out, indicating that the hob has entered the state of standby mode.
1. Touch the ON/OFF
2. Place a suitable pan on the cooking zone that you
wish to use. Make sure the bottom of the pan and the
surface of the cooking zone is clean and dry.
3. Select a heat setting by touching the "slider" control.
If you don't choose a heat setting within 1 minute,
•
the Induction hob will automatically switch off.
You will need to start again at step 1.
You can modify the heat setting at any time during
•
cooking.
When you have finished cooking
1.
Turn the cooking zone off by touching "slider"control
down to"0". Make sure the display shows"0".
2.
Turn the whole hob off by touching the ON/OFF
control.
3.
Beware of hot surfaces
"H" will show which means cooking zone is too hot to touch. It
will disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving function if
you want to heat further pans, use the hotplate that is still hot.
switch. all the indicators show "– "
Publicité
