WIKA PSA-31 Mode D'emploi page 27

6. Commissioning, operation
Index Object
(decimal) name
240 MBA
241 MBE
250 DISR
251 DISM
252 PAS
253 LOCK
Index Object name
(decimal)
2 RES
2 LOCK
2 UNLOCK
2 RHL
2 0SET
WIKA operating instructions pressure switch model PSA-31 for sanitary applications
Format Access
32 Bit IEEE R
754 Float
32 Bit IEEE R
754 Float
8 Bit R/W
Enumeration
8 Bit R/W
Enumeration
16 Bit R/W
unsigned
8 Bit R/W
Enumeration
Value Remarks
130 Return the set parameter to the factory settings
163 General keylock On
164 General keylock Off
176 Clear the Min- and Max-value memories
177 Zero-point adjustment (3 % of span) see page 17
Value range Factory setting
- 1,000
- 9,000
0 = Standard 0
1 = 180° rotated
0 = Act 0
1 = HIGH
2 = LOW
3 = SP1/FH1
4 = RP1/FL1
5 = SP2/FH2
6 = RP2/FL2
7 = Off
0 ... 9,999 -
0 = Unlocked 0
1 = Locked
Remarks
The pressure value is always
linearised such that the MBA
equals the value 1,000 and the
MBE equals the value 9,000.
The pressure value is always
linearised such that the MBA
equals the value 1,000 and the
MBE equals the value 9,000.
Turn display indicator by 180°
Display value in display mode
Enter password in order to
set the parameters at the
instrument. Password 0 = no
password
General keylock
27
EN