Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
BEFORE CALLING AFTER-SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at
improper levels or if a problem occurs with the appliance. Warning codes are
displayed in the freezer and cooler indicators.
ERROR TYPE
E01
E02
E03
E06
E07
E08
E09
MEANING
Sensor warning
Sensor warning
Sensor warning
Sensor warning
Sensor warning
Power supply to the
Low Voltage
device has dropped to
Warning
Freezer
Likely to occur after
compartment is
not cold enough
WHY
below 170 V.
long term power
failure.
WHAT TO DO
Call Service for assistance
as soon as possible.
Call Service for assistance
as soon as possible.
Call Service for assistance
as soon as possible.
Call Service for assistance
as soon as possible.
Call Service for assistance
as soon as possible.
- This is not a device failure, this
error helps to prevent damages
to the compressor.
- The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs
to be contacted.
1. Set the freezer temperature
to a colder value or set Super
Freeze. This should remove
the error code once the
required temperature has been
reached. Keep doors closed
to improve time taken to reach
the correct temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh produce
to the freezer compartment
until the correct temperature
has been reached and the
error is no longer.
If this warning continues an
authorised technician needs
to be contacted.
English 65
Publicité
