Wi-fi Connection: Select the SSID and write the password to get connected to a Wi-
1
fi Access point. Only secured AP are available to connect. There is a list of available
Wi-fi connections to help the selection.
Current Configuration: Last information about the current configured connections.
2
Wired Internet Access: To register the Gateway to the cloud, and to be able to
3
include it and the devices in an installation to start the telemetry collection and the
management in the Cloud Web Portal.
a. DHCP: Automated networking
configuration and only SSID and
Password are required.
b. Manual Wi-fi Connection: The
Wi-fi
can
be
by
choosing
"Network Configuration" selector.
Configuration requires IP Address,
Subnet Mask, Router IP and DNS
List.
a. DHCP Configuration: No action
required but optionally the DNS list
locations can be added.
b. Manual Network Configuration:
to configure manually the connection.
This option could require support
from IT management. Configuration
requires IP Address, Subnet Mask,
Router IP and DNS List.
30
network
configuration,
manually
selected,
Manual
in
the