Roca A5A5279C00 Manuel De L'utilisateur page 29

When a step is completed (and ready or normal operation) is marked in green colour on
the top progress indication. At least you need internet connectivity for step 1, the Gateway
must be correctly registered to a user in the cloud for step 2 and some devices must be
registered to the Gateway and telemetry is collected from them in step 3.
❚ 3.4 CONNECTIVITY
This page allows to configure the connection of the Gateway with internet and some
communication parameters.
Wi-fi access to the internet is only allowed using secured connections, open Wi-fis are not
allowed to connect.
For each connection type is possible to set the fall-down priority in case of have connectivity
problems in the other connections, for example Wi-fi is set to Priority = 1 and Ethernet in
Priority = 2, if the Gateway loses the Wi-fi connection, automatically will try to connect using
the Ethernet connection.
EN
WIFI INTERNET ACCESS
Enabled:
Priority:
Principal SSID:
Password:
Network Configuration:
WIREDINTERNET ACCESS (ETHERNET)
Enabled:
Priority:
Network Configuration:
COMMUNICATION PARAMETERS
Polling Delay
Disable Telemetry
Roca Smart / Connectivity
1
0
IOT_Lab
DHCP
3
1
DHCP
4
15 min
5
Indicative Polling Time Over Timing
Depends On Number Of Devices And
Bluetooth Response
GW ID:
CURRENT CONFIGURATION
IOT_Lab
CURRENT CONFIGURATION
Ip Address: 192.168.0.222
Subnet: 255.255.255.0
Router: 192.168.0.1
DNS: 1.1.1.1 / 8.8.8.8
CURRENT CONFIGURATION
15 min
Disabled
29
CT2004300068
ONLINE
2
6
CANCEL SAVE